Do Safety Data Sheets Expire In Canada?

SDS Expiry Dates by Province

Depending on your provincial or territorial jurisdiction, some employers have obligations under WHMIS 2015 to ensure SDSs for hazardous products in your workplace are not more than three years old.

Do SDS sheets expire in Canada?

Employer Requirement to keep supplier safety data sheets (SDS) up to date (three years) – 985-1-IPG-050 – Canada.ca.

How long are safety data sheets valid for?

3 years

Is there an expiry date for safety data sheets SDS?

Under WHMIS law, an MSDS for a controlled product must not be more than three years old. If you are still using a product that you bought more than three years ago, you may not have a current MSDS.

Do safety data sheets have to be updated every year?

SDSs will be required to be updated within 90 days of the supplier being aware of the new information. Note: The requirement to update a material safety data sheet every three years, as was the case under WHMIS 1988, no longer applies.

The Hazardous Products Regulations (HPR) requires the disclosure of the “initial supplier identifier” on the label and safety data sheet (SDS) of a hazardous product. What happens in the case of a US manufacturer who is a Canadian importer, but who does not have a Canadian location?

How often should SDS be updated in Canada?

Implemented by Health Canada, the original WHMIS 1988 rules required manufacturers to review and update safety data sheets every three years.

Do SDS expire in Canada?

In Canada, every material covered by WHMIS (Workplace Hazardous Materials Information System) must have an accompanying SDS. Canada is in the midst of phasing in its conversion to the Globally Harmonized System (GHS) through 2018.

Where should safety data sheets be kept?

The employer shall maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s).

What are the 4 main purposes for an SDS?

You can think of the SDS as having four main purposes. It provides information on: Identification: for the product and supplier. a. Hazards: physical (fire and reactivity) and health.